Introducing the Banshee Lite: a Dual-ESP32 development board built from scratch by The Wired Hatters for advanced experimentation across several mediums, security research, and firmware development. Note: this is a preorder, the banshee lite will go into production once all 100 preorders have been filled.
At its core, the Banshee Lite combines two hand-picked microcontrollers into a single infinitely expendable hardware platform: the ESP32-C5 WROOM N8R8 and the ESP32-S3 WROOM N16R8. Each MCU is assigned a clear role, allowing complex tasks to be split cleanly between control logic and high-performance data handling.
The Banshee Lite runs GhostESP
firmware."GhostESP is a multi-protocol security testing toolkit for ESP32 devices. It enables scanning Wi-Fi networks, capturing handshakes, launching wireless attacks, reading NFC tags, learning and transmitting IR signals, and more—on hardware designed to expose and control every subsystem intentionally."Documentation
As of the 12th May 2026 the Banshee Lite when running GhostESP, supports Sub-GHz functionality paired with the Rabbit Labs Flux-Capacitor as a plug and play module. Flux Capacitor available here.
Included:
Custom Packaging
3D Printed PLA case
The Banshee Lite
Note: Comes WITHOUT battery
Feature Overview
Core System Dual ESP32 architecture (ESP32-C5 + ESP32-S3)
Dedicated internal communication between both ESP32s
Designed for GhostESP firmware and future expansion
Power & Hardware Control
Actual battery fuel gauge (dedicated IC)
Reverse polarity protection on battery input
Designed to reach full performance with a 2000 mAh 1S Li-Po battery (Information below)
Backlight PWM control for the main display
Displays & UI
Main TFT display for primary interaction
Joystick + Capacitive touch
Lighting & Indicators
UV Flashlight
Connectivity & I/O
USB-C port for flashing, debugging, charging & BadUSB
USB-A host port for HID peripherals (e.g. keyboards)
Ethernet for wired networking/analysis
SD card slot for extended storage and logging
18-pin GPIO expansion rail (full flipper zero 18 pin rail)
M5-compatible I²C Grove port
M5-compatible UART Grove port
Wireless & Sensors
DualBand 2.4GHz & 5 GHz
GPS module with: Internal antenna & External SMA antenna option
2 Infrared TX LEDs and RX (learn & transmit IR signals)
BMI270 Gyro (Bosch original)
ST25R NFC onboard
All devices are thoroughly tested before shipping to ensure they are fully functional. If you encounter any issues while setting up the device, please do not hesitate to create a ticket in our Discord or contact me via forms on our site!
Banshee Lite - Preorder 4/100
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)
_gif.gif)

